Dissolving Ball for Bearing wall sealing pressure from China manufacturer

Payment Terms:	T/T,L/C,WU
Place of Origin:	Zhejiang, China (Mainland)

Product Detail

Model No.: MOSINTER

Production Capacity: 10000PCS/year

Delivery Date: within 7 days

Main material: Aluminium magnesium alloy n...

Density: 1.85-1.9g/cm3

Compression strength: 70MPa under the range of 1/...

Hardness: 3-5% KCl or NaCl solution

Means of Transport: Ocean,Land,Air

Packing: According to customer reque...

Name: Dissolving Frac Ball

Temp: Working in the water under ...

Size: Diameter18-100mm

Tolerances of diamete: According to the temperatur...

Tolerances of diameter:: ±0.02-0.03mm

It is due to the low density of the ball (1.85 1.9 g/cm3), flowback faster, can return ahead of completely dissolved.

Dissolving Frac ball for Bearing wall sealing pressure

Data

Main material: Aluminium magnesium alloy nano materials
Working in the water under 150℃.
Compression strength: 70MPa under the range of 1/4, 1/8.
Low density (1.85-1.9g/cm3).
Dissolution medium: 3-5% KCl or NaCl solution.
Melting temperature: According to the temperature of oil-field, higher temperature, the speed of dissolving more faster.
Cracks, scratchs, chips could not be allowed on the ball's surface.
Size: Diameter 18-100 mm.
Tolerances of diameter: ±0.02-0.03 mm
Application	For fracturing horizontal well of a large bridge plug piecewise.
	For fracturing well of open hole packer sliding sleeve.
	For fracturing well of multistage packer.
	For wells of low pressure and easy to cause negative pressure.

Test conditions of Dissolving balls

1. Dissolution medium(Test liquid): 3-5% KCl or NaCl solution.
2. Temperature of test liquid: 70-90℃
3. The total volume of test liquid: 2-3L
4. Time: Replace the dissolution medium(test liquid) every 5 hours later.
5. Before replacement of test liquid, record the changes of the ball's diameter and weight.
6. After testing continuously about 7 to 15 days, can observe the best effect.

1. Dissolution medium(Test liquid): 3-5% KCl or NaCl solution.

2. Temperature of test liquid: 70-90℃

3. The total volume of test liquid: 2-3L

4. Time: Replace the dissolution medium(test liquid) every 5 hours later.

5. Before replacement of test liquid, record the changes of the ball's diameter and weight.

6. After testing continuously about 7 to 15 days, can observe the best effect.